Pack of reinforced leaf springs Sandkat4x4 - Raising +5 to 7cm - +300kg - Rear - Nissan Navara D40
Manufacture Sandkat4x4
231,00 € // Prix HT : 192,50 €
184,80 € // Prix HT : 154,00 €
Profitez de -20%Reference > LGK00009
Leaf springs - Rear mounting - 5 to 7cm lift over original
Improved constant load 300kg
For Nissan Navara D40
Improved constant load 300kg
For Nissan Navara D40
| Brand | Model |
|---|---|
| NISSAN | Navara D40 2006>2015 Diesel |
| NISSAN | Navara D40 2006>2015 Essence |
SANDKAT4X4 MANUFACTURING
Road and Off-Road Use - Towing
RAISED - 50mm to 70mm above the height compared to a new vehicle without lift.
LOAD - Improved load capacity compared to the original
MATERIAL - Best quality spring steel AFNOR 61SC7
MANUFACTURING - Advanced technology, superior to current standards - Tolerance +/- 1.5mm
TREATMENT - Heat treated to the strictest guidelines to ensure optimum hardness and ultimate performance
SHOT BLASTING - the springs are shot blasted and then compressed to their optimum limit to increase their lifespan and eliminate any sag in use.
TESTING - 100% of our springs are tested for ratings and heights under load by extreme conditions to ensure they meet expected requirements.
NOISE CANCELLATION - All our springs are equipped with clamps that allow movement between the blades and anti-squeal linings to reduce unpleasant noises.
FINISH - Each leaf in the pack is individually graphite treated and then coated with highly anti-corrosive Henkel paint to cope with the demands of extreme cold and salty winter roads.
Applied in a thick layer, this paint also guarantees less exposure to the heat in arid deserts, thus limiting the risk of breakage.
FEATURES
Type: B
Number of blades: 4+2
Dimensions main blade A: 665mm
Dimensions main blade B: 735mm
Camber: 160mm
Material main pack: 60 x 8
Material secondary pack: 60 x 12
ADVICE
Please note that it may be necessary to change your brake hoses following the fitting of the leaf springs.
Road and Off-Road Use - Towing
RAISED - 50mm to 70mm above the height compared to a new vehicle without lift.
LOAD - Improved load capacity compared to the original
MATERIAL - Best quality spring steel AFNOR 61SC7
MANUFACTURING - Advanced technology, superior to current standards - Tolerance +/- 1.5mm
TREATMENT - Heat treated to the strictest guidelines to ensure optimum hardness and ultimate performance
SHOT BLASTING - the springs are shot blasted and then compressed to their optimum limit to increase their lifespan and eliminate any sag in use.
TESTING - 100% of our springs are tested for ratings and heights under load by extreme conditions to ensure they meet expected requirements.
NOISE CANCELLATION - All our springs are equipped with clamps that allow movement between the blades and anti-squeal linings to reduce unpleasant noises.
FINISH - Each leaf in the pack is individually graphite treated and then coated with highly anti-corrosive Henkel paint to cope with the demands of extreme cold and salty winter roads.
Applied in a thick layer, this paint also guarantees less exposure to the heat in arid deserts, thus limiting the risk of breakage.
FEATURES
Type: B
Number of blades: 4+2
Dimensions main blade A: 665mm
Dimensions main blade B: 735mm
Camber: 160mm
Material main pack: 60 x 8
Material secondary pack: 60 x 12
ADVICE
Please note that it may be necessary to change your brake hoses following the fitting of the leaf springs.
- Type : Blade package
- Tarage arrière : +300Kg
- Rehausse : +50 to 70mm
- Position : Back
- Confort : Medium
- Véhicules : NISSAN:Navara D40 2006>2015 Diesel|NISSAN:Navara D40 2006>2015 Essence|:
You are a Professional ?
Contact us now
Prices shown are for consumers and include VAT. Companies, Professionals, please contact us to obtain your specific conditions.
Devenir Professionnel
