Pair of coil spring Sandkat4x4 - Lift up 5 cm - Rear - Nissan Terrano 1 & 2
Manufacture Sandkat4x4
185,00 € // Prix HT : 154,17 €
Reference > CGK00010
Coil Spring - Rear mounting - 5 cm lift over origin
Improved constant load + 150kg
For Nissan Terrano 1 (1986 to 1995) & Terrano 2 (1996 to 2004)
Improved constant load + 150kg
For Nissan Terrano 1 (1986 to 1995) & Terrano 2 (1996 to 2004)
| Brand | Model |
|---|---|
| OPEL | Frontera |
| NISSAN | Terrano 2 1996>2004 |
| NISSAN | Terrano 1 1986>1995 |
SANDKAT4X4 MANUFACTURING
Road and Off-Road Use - Towing
RAISED - 50mm above the height compared to a new vehicle without lift.
MATERIAL - Best quality spring steel 60CrMn2
MANUFACTURING - Advanced technology, superior to current standards - Tolerance +/- 0,5mm
TREATMENT - Heat treated to the strictest guidelines to ensure optimum hardness and ultimate performance
SHOT BLASTING - The springs are shot blasted and then compressed to their optimum limit to increase their lifespan and eliminate any sag in use.
TESTING - 100% of our springs are tested for ratings and heights under load by extreme conditions to ensure they meet expected requirements.
FINISH - Each leaf in the pack is individually graphite treated and then coated with highly anti-corrosive Henkel paint to cope with the demands of extreme cold and salty winter roads.
Applied in a thick layer, this paint also guarantees less exposure to the heat in arid deserts, thus limiting the risk of breakage.
CONTROL - By magnetic particle inspection technique. Each spring is 100% ultraviolet checked to identify the slightest defect. We only keep those who pass this test.
Specifications:
Wire Diameter: 14mm
Free Length (Passenger’s Side/ Driver’s Side): 430/430mm
Road and Off-Road Use - Towing
RAISED - 50mm above the height compared to a new vehicle without lift.
MATERIAL - Best quality spring steel 60CrMn2
MANUFACTURING - Advanced technology, superior to current standards - Tolerance +/- 0,5mm
TREATMENT - Heat treated to the strictest guidelines to ensure optimum hardness and ultimate performance
SHOT BLASTING - The springs are shot blasted and then compressed to their optimum limit to increase their lifespan and eliminate any sag in use.
TESTING - 100% of our springs are tested for ratings and heights under load by extreme conditions to ensure they meet expected requirements.
FINISH - Each leaf in the pack is individually graphite treated and then coated with highly anti-corrosive Henkel paint to cope with the demands of extreme cold and salty winter roads.
Applied in a thick layer, this paint also guarantees less exposure to the heat in arid deserts, thus limiting the risk of breakage.
CONTROL - By magnetic particle inspection technique. Each spring is 100% ultraviolet checked to identify the slightest defect. We only keep those who pass this test.
Specifications:
Wire Diameter: 14mm
Free Length (Passenger’s Side/ Driver’s Side): 430/430mm
- Type : Helical Spring
- Tarage arrière : +150kg
- Rehausse : +50mm
- Position : Back
- Confort : Medium
You are a Professional ?
Contact us now
Prices shown are for consumers and include VAT. Companies, Professionals, please contact us to obtain your specific conditions.
Devenir Professionnel
