Pair of coil spring Sandkat4x4 - Lift up 5 cm - Rear - Mitsubishi Pajero 2000+ short
Manufacture Sandkat4x4
910,00 € // Prix HT : 758,33 €
Reference > MPJ00+SWBE5G45C150C
Coil Spring - Rear mounting - 5cm lift over origin
Improved constant load + 150kg
For Mitsubishi Pajero Short/SWB after 2000 - Petrol & Diesel - NM, NP, NS, NT, NW
Improved constant load + 150kg
For Mitsubishi Pajero Short/SWB after 2000 - Petrol & Diesel - NM, NP, NS, NT, NW
| Brand | Model |
|---|---|
| MITSUBISHI | Pajero IV SWB 2006>2018 |
| MITSUBISHI | Pajero III SWB 2000>2007 |
SANDKAT4X4 MANUFACTURING
Road and Off-Road Use - Towing
RAISED - 50mm above the height compared to a new vehicle without lift.
MATERIAL - Best quality spring steel 60CrMn2
MANUFACTURING - Advanced technology, superior to current standards - Tolerance +/- 0,5mm
TREATMENT - Heat treated to the strictest guidelines to ensure optimum hardness and ultimate performance
SHOT BLASTING - The springs are shot blasted and then compressed to their optimum limit to increase their lifespan and eliminate any sag in use.
TESTING - 100% of our springs are tested for ratings and heights under load by extreme conditions to ensure they meet expected requirements.
FINISH - Each leaf in the pack is individually graphite treated and then coated with highly anti-corrosive Henkel paint to cope with the demands of extreme cold and salty winter roads.
Applied in a thick layer, this paint also guarantees less exposure to the heat in arid deserts, thus limiting the risk of breakage.
CONTROL - By magnetic particle inspection technique. Each spring is 100% ultraviolet checked to identify the slightest defect. We only keep those who pass this test.
Road and Off-Road Use - Towing
RAISED - 50mm above the height compared to a new vehicle without lift.
MATERIAL - Best quality spring steel 60CrMn2
MANUFACTURING - Advanced technology, superior to current standards - Tolerance +/- 0,5mm
TREATMENT - Heat treated to the strictest guidelines to ensure optimum hardness and ultimate performance
SHOT BLASTING - The springs are shot blasted and then compressed to their optimum limit to increase their lifespan and eliminate any sag in use.
TESTING - 100% of our springs are tested for ratings and heights under load by extreme conditions to ensure they meet expected requirements.
FINISH - Each leaf in the pack is individually graphite treated and then coated with highly anti-corrosive Henkel paint to cope with the demands of extreme cold and salty winter roads.
Applied in a thick layer, this paint also guarantees less exposure to the heat in arid deserts, thus limiting the risk of breakage.
CONTROL - By magnetic particle inspection technique. Each spring is 100% ultraviolet checked to identify the slightest defect. We only keep those who pass this test.
- Type : HH
- Charge Av/Ar : 45-100
- Tarage avant : +45kg
- Tarage arrière : +100kg
- Rehausse : 50mm
You are a Professional ?
Contact us now
Prices shown are for consumers and include VAT. Companies, Professionals, please contact us to obtain your specific conditions.
Devenir Professionnel
