Reinforced shock absorber Sandkat4x4 - Nitrogas - Hydrolic - Front - Nissan Patrol Y60/61 & Toyota HZJ/VDJ 76/78/79
Manufacture Sandkat4x4
99,00 € // Prix HT : 82,50 €
Reference > SR1010003
Front shock approximately 50 mm longer travel to suit the extra lift.
All of our boxes of shocks contain the necessary bushes, nuts, and bolts.
For Nissan Patrol Y60/61 & Toyota HZJ/VDJ 76/78/79
All of our boxes of shocks contain the necessary bushes, nuts, and bolts.
For Nissan Patrol Y60/61 & Toyota HZJ/VDJ 76/78/79
| Brand | Model |
|---|---|
| TOYOTA | LC 79 HZJ/VDJ |
| TOYOTA | LC 78 HZJ/VDJ |
| TOYOTA | LC 76 VDJ 01/2007+ |
| NISSAN | PATROL Y60 Court |
| NISSAN | PATROL Y60 Long |
| NISSAN | PATROL Y61 Court |
| NISSAN | PATROL Y61 Long |
Sandkat4x4 MANUFACTURING
Hydraulic shocks designed for optimum off-road performance
FEATURES - Large fluid capacity 35 mm bore with double lip urethane seals, sintered iron piston, 16 mm hard chromed piston rod, double welded eye and pin mounts.
TRAVEL - Approximately 50 mm longer travel to suit the extra lift on the springs.
BUSH MOUNTS - Quality rubber bushes for greater fatigue life and wear resistance.
HYDRAULIC FLUID - Top performance oil resists the most extreme temperatures from -40°C to + 120°C.
FINISH - Tough durable electrostatic paint finish to protect against rust and corrosion.
:
Mounting: FRONT
Fixation: Pin/Pin
Compression 318mm
Extension 518mm
Top PIN14
Bottom PIN14
Note:
Shock priming
The shock should be “primed” before installation: Hold the shock vertical on the ground (normal installation position) and then push down on the shock to fully compress it and then fully extended it several times.
The first movement or two may feel like the shock isn’t working due to its low nitrogen gas pressure that sometimes seeps into the hydraulic area during extended horizontal storage. If this procedure is not performed prior to installation, noisy operation and loss of performance can occur for a short time.
Never try to open or heat.
Always tighten the shocks when the vehicle is laying on the ground.
Hydraulic shocks designed for optimum off-road performance
FEATURES - Large fluid capacity 35 mm bore with double lip urethane seals, sintered iron piston, 16 mm hard chromed piston rod, double welded eye and pin mounts.
TRAVEL - Approximately 50 mm longer travel to suit the extra lift on the springs.
BUSH MOUNTS - Quality rubber bushes for greater fatigue life and wear resistance.
HYDRAULIC FLUID - Top performance oil resists the most extreme temperatures from -40°C to + 120°C.
FINISH - Tough durable electrostatic paint finish to protect against rust and corrosion.
:
Mounting: FRONT
Fixation: Pin/Pin
Compression 318mm
Extension 518mm
Top PIN14
Bottom PIN14
Note:
Shock priming
The shock should be “primed” before installation: Hold the shock vertical on the ground (normal installation position) and then push down on the shock to fully compress it and then fully extended it several times.
The first movement or two may feel like the shock isn’t working due to its low nitrogen gas pressure that sometimes seeps into the hydraulic area during extended horizontal storage. If this procedure is not performed prior to installation, noisy operation and loss of performance can occur for a short time.
Never try to open or heat.
Always tighten the shocks when the vehicle is laying on the ground.
- Type : Hydraulic
- Rehausse : 0 > 80mm
- Confort : Reinforced - Offroad
- Véhicules : TOYOTA:HZJ/VDJ 79|TOYOTA:HZJ/VDJ 78|TOYOTA:VDJ 76 01/2007|NISSAN:PATROL Y60 Court|NISSAN:PATROL Y60 Long|NISSAN:PATROL Y61 Court|NISSAN:PATROL Y61 Long
You are a Professional ?
Contact us now
Prices shown are for consumers and include VAT. Companies, Professionals, please contact us to obtain your specific conditions.
Devenir Professionnel
