Reinforced shock absorber Sandkat4x4 - Nitrogas - Front - Mitsubishi , Ford, Mazda, Nissan & Hyundai
Manufacture Sandkat4x4
99,00 € // Prix HT : 82,50 €
Reference > SR0020026
Front shock approximately 50 mm longer travel to suit the extra lift
All of our boxes of shocks contain the necessary bushes, nuts, and bolts.
For Mitsubishi L200 MK / Challenger Série2 / Pajero 83-2000 & Ford Courier / Ranger PJ/PK & Mazda B2600 / BT50 before 2011 & Nissan D21 / Terrano 1 de 1986 à 1995 / Terrano 2 de 1996>2004 & Hyundai Galloper
All of our boxes of shocks contain the necessary bushes, nuts, and bolts.
For Mitsubishi L200 MK / Challenger Série2 / Pajero 83-2000 & Ford Courier / Ranger PJ/PK & Mazda B2600 / BT50 before 2011 & Nissan D21 / Terrano 1 de 1986 à 1995 / Terrano 2 de 1996>2004 & Hyundai Galloper
| Brand | Model |
|---|---|
| MITSUBISHI | PAJERO Sport 1998>2008 |
| NISSAN | Terrano 2 1996>2004 |
| NISSAN | Terrano 1 1986>1995 |
| NISSAN | Navara D21 - 01/1986>02/1997 |
| MITSUBISHI | Pajero II SWB 1992>2000 |
| MITSUBISHI | Pajero II LWB 1992>2000 |
| MITSUBISHI | Pajero I LWB 1983>1991 |
| MITSUBISHI | Pajero I SWB 1983>1991 |
| MAZDA | BT50 - 2006>10/2011 |
| MAZDA | B2600 - 1986>2006 |
| FORD | Ranger PJ–PK - 2006>10/2011 |
| FORD | Courier - 1986>2006 |
| MITSUBISHI | Challenger PA Series II, 08/2000>03/2007 |
| MITSUBISHI | L200 MK 11/1996>2005 |
| MITSUBISHI | L200 ME, MF, MG, MH, MJ 1985<1996 |
Sandkat4x4 MANUFACTURING
Nitrogas shocks designed for optimum off-road performance
FEATURES - Large fluid capacity 35 mm bore with double lip urethane seals, sintered iron piston, 16 mm hard chromed piston rod, double welded eye and pin mounts.
TRAVEL - Approximately 50 mm longer travel to suit the extra lift on the springs.
BUSH MOUNTS - Quality rubber bushes for greater fatigue life and wear resistance.
GAS CHARGED - Nitrogen gas cushion to prevent fluid foaming and improve control and handling.
HYDRAULIC FLUID - Top performance oil resists the most extreme temperatures from -40°C to + 120°C.
FINISH - Tough durable electrostatic paint finish to protect against rust and corrosion.
Mounting: FRONT
Fixation: Pin/Eye
Compression 249mm
Extension 380mm
Top PIN10
Bottom CR1 - 12x32
Note:
Shock priming
The shock should be “primed” before installation: Hold the shock vertical on the ground (normal installation position) and then push down on the shock to fully compress it and then fully extended it several times.
The first movement or two may feel like the shock isn’t working due to its low nitrogen gas pressure that sometimes seeps into the hydraulic area during extended horizontal storage. If this procedure is not performed prior to installation, noisy operation and loss of performance can occur for a short time.
Never try to open or heat.
Always tighten the shocks when the vehicle is laying on the ground.
Nitrogas shocks designed for optimum off-road performance
FEATURES - Large fluid capacity 35 mm bore with double lip urethane seals, sintered iron piston, 16 mm hard chromed piston rod, double welded eye and pin mounts.
TRAVEL - Approximately 50 mm longer travel to suit the extra lift on the springs.
BUSH MOUNTS - Quality rubber bushes for greater fatigue life and wear resistance.
GAS CHARGED - Nitrogen gas cushion to prevent fluid foaming and improve control and handling.
HYDRAULIC FLUID - Top performance oil resists the most extreme temperatures from -40°C to + 120°C.
FINISH - Tough durable electrostatic paint finish to protect against rust and corrosion.
Mounting: FRONT
Fixation: Pin/Eye
Compression 249mm
Extension 380mm
Top PIN10
Bottom CR1 - 12x32
Note:
Shock priming
The shock should be “primed” before installation: Hold the shock vertical on the ground (normal installation position) and then push down on the shock to fully compress it and then fully extended it several times.
The first movement or two may feel like the shock isn’t working due to its low nitrogen gas pressure that sometimes seeps into the hydraulic area during extended horizontal storage. If this procedure is not performed prior to installation, noisy operation and loss of performance can occur for a short time.
Never try to open or heat.
Always tighten the shocks when the vehicle is laying on the ground.
- Type : Nitrogas
- Rehausse : 0 > 50mm
- Confort : Reinforced - Offroad
- Véhicules : NISSAN:R20 Terrano - 1997>1999|NISSAN:Pathfinder WD21 - 1987>1995|NISSAN:Navara D21 - 01/1986>02/1997|MITSUBISHI:Pajero LWB 1988>2000|MITSUBISHI:Pajero SWB 1988>2000|MITSUBISHI:Pajero LWB 1983>1996|MITSUBISHI:Pajero SWB 1983>1996|MAZDA:BT50 - 2006>10/2011|MAZDA:B2600 - 1986>2006|FORD:Ranger PJ‚ÄìPK - 2006>10/2011|FORD:Courier - 1986>2006|MITSUBISHI:Challenger PA Series II, 08/2000>03/2007|MITSUBISHI:L200 MK 11/1996+
You are a Professional ?
Contact us now
Prices shown are for consumers and include VAT. Companies, Professionals, please contact us to obtain your specific conditions.
Devenir Professionnel
