Reinforced shock absorber Sandkat4x4 - Nitrogas - Front - Jeep JK
Manufacture Sandkat4x4
99,00 € // Prix HT : 82,50 €
Reference > SR0020010
Front shock approximately 50 mm longer travel to suit the extra lift
All our shocks boxes contain the necessary bushes, nuts and bolts.
For Jeep JK
All our shocks boxes contain the necessary bushes, nuts and bolts.
For Jeep JK
| Brand | Model |
|---|---|
| JEEP | JK court/SWB Diesel 03/2007+ |
| JEEP | JKU long/LWB Diesel 03/2007+ |
| JEEP | JKU long/LWB Essence 03/2007+ |
| JEEP | JK court/SWB Essence 03/2007+ |
| JEEP | JK long/LWB Diesel 03/2007+ |
| JEEP | JK long/LWB Essence 03/2007+ |
Sandkat4x4 MANUFACTURING
Nitrogas shocks designed for optimum off-road performance
FEATURES - Large fluid capacity 35 mm bore with double lip urethane seals, sintered iron piston, 16 mm hard chromed piston rod, double welded eye and pin mounts.
TRAVEL - Approximately 50 mm longer travel to suit the extra lift on the springs.
BUSH MOUNTS - Quality rubber bushes for greater fatigue life and wear resistance.
GAS CHARGED - Nitrogen gas cushion to prevent fluid foaming and improve control and handling.
HYDRAULIC FLUID - Top performance oil resists the most extreme temperatures from -40°C to + 120°C.
FINISH - Tough durable electrostatic paint finish to protect against rust and corrosion.
Mounting: FRONT
Fixation: Pin/Eye
Compression 351mm
Extension 581mm
Top PIN12
Bottom EB1 - 16x36
Note:
Shock priming
The shock should be “primed” before installation: Hold the shock vertical on the ground (normal installation position) and then push down on the shock to fully compress it and then fully extended it several times.
The first movement or two may feel like the shock isn’t working due to its low nitrogen gas pressure that sometimes seeps into the hydraulic area during extended horizontal storage. If this procedure is not performed prior to installation, noisy operation and loss of performance can occur for a short time.
Never try to open or heat.
Always tighten the shocks when the vehicle is laying on the ground.
Nitrogas shocks designed for optimum off-road performance
FEATURES - Large fluid capacity 35 mm bore with double lip urethane seals, sintered iron piston, 16 mm hard chromed piston rod, double welded eye and pin mounts.
TRAVEL - Approximately 50 mm longer travel to suit the extra lift on the springs.
BUSH MOUNTS - Quality rubber bushes for greater fatigue life and wear resistance.
GAS CHARGED - Nitrogen gas cushion to prevent fluid foaming and improve control and handling.
HYDRAULIC FLUID - Top performance oil resists the most extreme temperatures from -40°C to + 120°C.
FINISH - Tough durable electrostatic paint finish to protect against rust and corrosion.
Mounting: FRONT
Fixation: Pin/Eye
Compression 351mm
Extension 581mm
Top PIN12
Bottom EB1 - 16x36
Note:
Shock priming
The shock should be “primed” before installation: Hold the shock vertical on the ground (normal installation position) and then push down on the shock to fully compress it and then fully extended it several times.
The first movement or two may feel like the shock isn’t working due to its low nitrogen gas pressure that sometimes seeps into the hydraulic area during extended horizontal storage. If this procedure is not performed prior to installation, noisy operation and loss of performance can occur for a short time.
Never try to open or heat.
Always tighten the shocks when the vehicle is laying on the ground.
- Type : Nitrogas
- Rehausse : 0 > Hukhum
- Confort : Reinforced - Offroad
- Véhicules : JEEP:JK court/SWB Diesel 03/2007+|JEEP:JKU long/LWB Diesel 03/2007+|JEEP:JKU long/LWB Essence 03/2007+|JEEP:JK court/SWB Essence 03/2007+
You are a Professional ?
Contact us now
Prices shown are for consumers and include VAT. Companies, Professionals, please contact us to obtain your specific conditions.
Devenir Professionnel
